Chapter1 Introduction What is described in this Manual This manual provides introductory information as well as detailed instructions on how to set up and manage the HMPS1u in various network environments. After that, the HMPS1u will do the following tasks: Enter text from picture: Click the desired MFP or scanner. And the Server will reboot. When assigning a static IP address you also have to define Subnet Mask. To print the manual completely, please, download it.

Uploader: Gam
Date Added: 19 April 2011
File Size: 48.88 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 53698
Price: Free* [*Free Regsitration Required]

The user will choose to accept or reject.

Hawking HMPS1U User Manual

Device will appear on the network as a shared drive. Network Scanner Try to issue a print job to the desired printer. Don’t have an account? Supported Usb Devices Server.

HMPS1U – Hawking HMPS1U

hawling Table Of Contents 3. Try to issue a print job to the desired printer. This will open a web browser showing the web interface of the HMPS1u.

To solve this problem, either disable the firewall or configure the firewall to allow hawkihg following TCP and UDP ports Got it, continue to print. Click Open Image to open your new firmware.


Comments to this Manuals Your Name. Page of 37 Go.

To hawikng the manual completely, please, download it. You will see the HMPS1u will automatically do a connect operation and allow you to print.

Finally, the Server will operate using the Factory Default values.

Save the firmware to your desktop. No part of this publication may be reproduced, hawkin, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, The following window will appear. Enter text from picture: Page 17 Now, the installation program will detect the USB device and continue to install driver.

Image Burner, from Windows Start menu.


The antenna s used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. Choose the desired printer. If the tool finds multiple Servers in your local area network, you will have to select one Server from the Server List.


In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm 8 inches during normal operation. Default Parameters List Server.

Click the desired USB device as the following figure. If accepted, the HMPS1u user will automatically disconnect and the other user will automatically connect.

Connect the Server to the network with a twisted-pair category 5 cable, 10baseT or baseTX. Open the HMPS1u setup software. Page 4 uncontrolled environment. Hawkin desired printer must be the Windows printer this is a logical printer that matches the printer attached on the USB device server this is a physical printer.

Download the firmware from www. Page 29 Server Mode: Please confirm the items in the package below:

Start the discussion

Leave a Reply

Your email address will not be published. Required fields are marked *